Q. How does the Wilsonart Commercial Flooring line differ construction or performance-wise from other Wilsonart Flooring lines?

A. Wilsonart Commercial Flooring has been designed specifically for commercial use. It features Permaplex; construction, a high performance wear layer, an acoustic attenuation layer and a 15-year wear, stain and fade commercial warranty. Other Wilsonart Flooring products – such as Red Label, Estate Plus and Classic – are also suitable for use in some commercial applications, but warranties may vary.

Q. Are Wilsonart Flooring products suited for ‘glueless’ installation in commercial applications?

A. The use of BlueFusion adhesive is required in all commercial installations. This Type II PVA adhesive requires minimal clean-up* and bonds on contact, eliminating the need for straps. There’s no need to let the glue cure before using the floor either. BlueFusion also saves money in the long term by extending the life of the flooring and keeping it beautiful and strong for years to come.

*All corridors, healthcare and some hospitality applications (restaurants, nightclubs, etc.) will require clean up due to gluing both profiles.

Q. What’s the difference between direct pressure laminate (DPL) and the Permaplex used in Wilsonart Commercial Flooring?

A. Manufactured exclusively by Wilsonart, Permaplex features a 45 mil thick wear layer that is more than 250% thicker than other laminate flooring surfaces.

Q. Why would I prefer Wilsonart Commercial Flooring to hardwood in a commercial environment?

A. Wilsonart Commercial Flooring offers many advantages over hardwood, including lower initial cost. However, the real benefits come into play after the flooring is installed. Unlike wood, Wilsonart Commercial Flooring resists fading and damage from sunlight and is highly resistant to scratches, burns and dents. There are also long-term maintenance requirements to consider: Wilsonart Commercial Flooring never needs stripping, waxing or refinishing – just sweep, damp mop and it’s good to go.

Q. Why does Wilsonart Commercial Flooring require the use of a commercial cushion under the floor?

A. Wilsonart Commercial Cushion is an integral part of the flooring system and must be used to ensure the integrity and performance of the finished installation. This high density underlayment offers superior reflective sound qualities and is fortified with an antimicrobial agent to provide enhanced mold and mildew resistance.

Q. What kinds of transitions are available for joining Wilsonart Commercial Flooring with other flooring surfaces?

A. Wilsonart Commercial Flooring’s exact match moldings offers a sleek, seamless look for commercial applications. The molding is designed with a bronze aluminum body that can be bonded with any Wilsonart Commercial Flooring design and is available in four profiles: Expansion, Transition, Carpet Transition and End Cap.

View here for downloadable dimensional drawings for each profile.

Q. What effects do Wilsonart Commercial Flooring products have on indoor air quality?